Sabre Hydrostatic Fill & Test Pumps

Standard equipment common to each model of pump:

Caterpillar Model 3056TA Diesel Engine rated at 165 HP at 2,000 RPM, equipped with 12 volt electrical system, alternator, batteries, Murphy safety instrument panel, automatic shut-downs on high coolant temperature and low engine oil pressure, 60 gallon fuel tank, heavy duty oil field type skid and stroke counter. MODEL FT-83

Low Pressure Fill Pump

Peerless Centrifugal Model 6AE12
15" impeller, single stage
6" suction
4" discharge
1,600 psi @ 51 m @ 2,000 RPM
(362 m3/hr @ 51 @ 2,000 RPM

High Pressure Test Pump

Wheatley Triplex Model T365M
Ductile iron fluid end
Pressure relief valve
1 3/8" plungers
3,210 PSI @ 28 gpm @ 500 RPM
(221.4 bar @ 6.36 m3 Per Hr. @ 500 RPM

MODEL FT-86

Low Pressure Fill Pump

Peerless Centrifugal Model 6AE12
15" impeller, single stage
6" suction
4" discharge
1,600 psi @ 167 feet head@ 2,000 RPM

High Pressure Test Pump

Wheatley Triplex Model P313
Stainless steel fluid end
Pressure relief valve
1.0" plungers
6,060 PSI @ 15.4 GPM @ 500 RPM

OPTIONAL:

Gould Model 3410M centrifugal pump
Pressure and temperature Recorder
Wheatley 10,000 PSI/8.4 GPM test pump
Dead Weight Tester

DIMENSIONS:
Overall Length 118" 2,997mm
Overall Height 57" 1,448mm
Overall Width 86" 2,184
Operating Weight 5,600 lbs 2,540 kg